ADDER CCS4-USB Podręcznik Użytkownika Pobierz pdf (Strona 13)

INSTALLATIONCONFIGURATIONOPERATION

FURTHER

INFORMATION

INDEX

Switching control via the network port

The network port allows switching to be controlled by commands issued from an

external system such as a Crestron™ or AMX™ controller.

Connecting to a network for remote control

1 Use a standard patch cable to link the network port ( ) of the CCS-PRO4 unit to a

network switch.

Link from

network

switch

Issuing remote switching commands via the network port

The Application Programming Interface (API) for the CCS-PRO4 requires the controlling

system to send an HTTP Get request to the following location:

• <ipadress>/cgi-bin/channel

The following parameters are available:

• km=<channel> Switches the keyboard and mouse to the dened channel.

• spk=<channel> Switches the speakers to the dened channel.

• usb1=<channel> Switches USB port 1 to the dened channel.

• usb2=<channel> Switches USB port 2 to the dened channel.

An example string is: 192.168.1.22/cgi-bin/channel?km=3&spk=4&usb1=2&usb2=1

The above example would switch the keyboard and mouse to channel 3, the speakers to

channel 4, USB port 1 to channel 2 and USB port 2 to channel 1.

Note: If security is enabled then the client must be authenticated before you are able to access

the CCS-PRO4.

2 Ensure that the CCS-PRO4 network port is correctly congured to a subnet that is

accessible from the sending device. See Network settings for details.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

Brak uwag

ADDER CCS4-USB Podręcznik Użytkownika Strona 13