ADDER CCS4-USB Dokumentacja Pobierz pdf (Strona 13)

 





g

Checking the CCS4-USB ﬁrmware version

In order to operate correctly with the CCS-XB, it is important that your CCS4-

USBhasrmwareversion2.0(orgreater)installed.Ifindoubtyoucancheckthe

ﬁrmware version of your CCS4-USB as follows:

1WithyourCCS4-USBpoweredonandwithaUSBkeyboardattached,press

and hold the COMPUTER button for roughly six seconds until the display

shows C.

2Ontheconnectedkeyboard,pressF followed by 1 and then press Enter.

The digits of the ﬁrmware version will be shown in sequence with a short

pause between each. For instance 1 > 0 > 2 means that the ﬁrmware

version is 1.02 and requires an upgrade.

3 Press E and then press Enter to return the CCS4-USB to normal operation.

If your CCS4-USB unit does require a ﬁrmware upgrade, please refer to the

Performing upgrades section.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 32 33

Brak uwag

ADDER CCS4-USB Dokumentacja Strona 13