ADDER AdderView CATxIP 000 Podręcznik Użytkownika Strona 13
- Strona / 111
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
12
Computer system (via CAM)
Each computer system is connected
to the AdderView CATx unit via a
Computer Access Module (CAM)
and standard category 5, 5e or
6 cabling. CAMs are available in
various formats to suit differing
computer system types and their
particular connector styles.
To connect a computer system
1 Ensure that power is disconnected from the AdderView CATx unit and the
system to be connected.
(Note: If it is not possible to switch off devices prior to connection, then
a ‘Hot plug’ procedure is available – see the Hot plugging and mouse
restoration section for more details).
2 Locate the required CAM (there are ve types available) and attach its video,
keyboard and mouse (PS/2-style, USB or Sun) and optional audio connectors
to the relevant sockets on the computer system.
3 Lay a suitable length of category 5, 5e or 6 cabling between the computer
system and the AdderView CATx unit. The maximum length of the cable
can be up to 50 metres (160 feet), however, bear in mind that the overall
distance between any remote user and any computer must not exceed 300
metres (980 feet).
4 Attach the connector of the cable
run to the socket of the CAM.
5 At the other end of the cable run, attach the cable connector to one of the
sockets labelled COMPUTER CONNECTIONS on the rear panel of the AdderView
CATx unit.
Video
PS/2-style mouse
PS/2-style keyboard
Audio
USB keyboard/mouse
Sun keyboard/mouse
A range of different
connector combinations
are made available
across the ve available
CAM formats
Computer
Access
Module
Category 5, 5e or 6
cable from CAM
Category 5, 5e or 6 cable
to AdderView CATx
AdderView CATx
rear panel
Green indicator - power present
Yellow indicator - signal activity
Note: CAMs derive power from the
computer system via either the PS/2-style
keyboard connector, USB or SUN connector.
6 Where necessary use the in-built video compensation feature of the
AdderView CATx unit to eliminate any effects caused by the cable run. See
Computer video compensation for details.
Note: Each CAM is
specically shaped so
that it can be secured
using a cable tie around
its middle. In this way,
two CAMs can also be
neatly joined together,
back-to-back.
- AdderView CATx 1
- Contents 2
- Operation 3
- Further information 3
- Introduction 5
- What’s in the box 7
- Installation 8
- Connections 9
- Local user 10
- Global user (IP network port) 12
- Computer system (via CAM) 13
- Modem/ISDN port 14
- Power in connection 15
- Power control port 16
- Cascading multiple units 17
- Using cascaded computers 21
- Conguration 23
- Conguration menus 24
- Conguration menus layout 25
- Video compensation 28
- Computer video compensation 29
- Remote user skew adjustment 31
- Autoscanning 33
- Initial IP conguration 37
- Encryption settings 39
- Networking issues 40
- 192.168.47.10::11590 41
- Power switching conguration 44
- Pxy=z\0D 44
- The KVMADMIN utility 45
- Performing upgrades 46
- Local and remote user access 50
- Logging in and out 53
- Selecting cascaded computers 53
- The conrmation box 53
- The reminder banner 54
- Routing status 54
- Global user access 56
- Using the viewer window 59
- Host selection 60
- Congure 60
- Mouse pointers 60
- Access mode - shared/private 61
- Power switching (via viewer) 61
- Auto calibrate 61
- Re-synchronise mouse 61
- Controls 62
- Viewer encryption settings 66
- Supported web browsers 66
- Functions 69
- User Preferences 70
- Global Preferences 71
- Setup Options 73
- Setup Options (continued) 74
- Advanced Options 75
- Congure IP port 76
- Network Conguration 77
- Modem Conguration 78
- Reset Conguration 78
- Clearing IP access control 79
- User accounts 81
- Unit conguration 82
- Advanced unit conguration 83
- Time & date conguration 84
- Network conguration 85
- Setting IP access control 86
- Serial port conguration 87
- Host conguration 88
- Adder Port Direct 89
- Logging and status 90
- Colour/Encoding 91
- Identities 94
- Load / Save 94
- Encoding and colour level 96
- Security 96
- IP addresses 97
- Net masks 97
- Security issues with ports 100
- 101
- 101
- 101
- Permissible key presses 103
- Creating macro sequences 103
- Warranty 105
- Safety information 105
- End user licence agreement 106
- Radio Frequency Energy 107
Powiązane produkty i podręczniki dla Networking ADDER AdderView CATxIP 000
Networking ADDER 2XPRO Podręcznik Użytkownika
(65 strony)
(65 strony)
Networking ADDER ALIF2002 Podręcznik Użytkownika
(38 strony)
(38 strony)
Networking ADDER 2XPRO Instrukcja Użytkownika
(75 strony)
(75 strony)
(4 strony)TP-LINK Routeurs manuels d'utilisation
À partir de A
Komentarze do niniejszej Instrukcji